solar outdoor display case
solar outdoor display case
outdoor solar case
outdoor solar case
illuminated solar display case outdoor
illuminated solar display case outdoor
information cabinet outdoor solar light
information cabinet outdoor solar light
salar eco showcase exterior
salar eco showcase exterior
solar outdoor display case
outdoor solar case
illuminated solar display case outdoor
information cabinet outdoor solar light
salar eco showcase exterior

Solar Case - illuminated LED Display Case - Exterior Cabinet

Solarcase provides a stylish, practical and efficient way to display information throughout the day and night. Solar powered LED illumination - exterior grade

£2,999.00 ex VAT

£3,598.80 inc VAT

Sorry, this option is currently out of stock and may take us a little longer to deliver.
This option is unavailable.

Payments by SagePay - Visa, Mastercard, American Express

Solar Case - illuminated LED Display Case - Exterior Cabinet

Solarcase provides a stylish, practical and efficient way to display information throughout the day and night in this exterior grade display cabinet for information. An outdoors notice board in a robust case.

They have the same interactive features as the solar post, so people are aware of their existence from a distance at night and are able to read the information displayed easily when they approach and the illumination intensity increases. The solar case has a wide variety of applications and is particularly useful in rural locations where conventional street lighting and mains electric supply does not exist or would be prohibitively expensive to install.

Download our brochure - CLICK HERE


The Solarcase control system uses a four channel dynamic boost algorithm to maximise the power generated from each individual solar panel. During the day the light tracks across the Solarcase, illuminating and shading the panels. To capture energy efficiently from direct and indirect sunlight, the optimum power point of the panels is calculated in real time and the charge taken from the panels is adjusted, harvesting the maximum power from each panel.

The batteries are charged throughout the day from
the energy harvested from the solar panels. The Solarcase control system has battery management technology which mitigates full discharge by reducing the LED brightness until there is sufficient ambient
light to charge. To maintain battery levels during transportation the battery can be disabled by briefly placing a magnet against the Solarcase, once installed the magnet is used again to activate ready for use. The advanced battery technology offers an exceptional temperature range & improved solar charging tolerance.

The Solarcase control system monitors the ambient light

levels, anticipating the transition from day to night. The automatic transition allows for seasonal changes in light levels for any environment. As night falls, a 180 lumensper-watt white LED illuminates. The brightness of the LED is regulated by a pulse-width-modulation driver circuit, the LED remains at a low light level until activated by the passive infrared (PIR) sensors. The PIR sensors have a detection range of up to 5m, on approach the LED brightens for 10 seconds, gently dimming to the low level.

The Solarcase control unit is fully sealed and uses IPX7 connectors.


Talk to the team about a quote for installation. Use the contact form below and we will reply within 24 hours.



Solar panel Specification

  • Power: 51.60 watts (12 x 4.3w panels)
  • Material: Polycrystalline Silicon
  • Construction: Photovoltaic cells sealed behind UV stabilised tempered glass.
  • Total Area: 300,000 mm

Battery Specification

  • Type: Ni-MH batteries
  • Capacity: 2 x 6.4v 10ah
  • Lifetime: 10 years at 20°C
  • Operating Temperature: -40°C to +85°C
  • Transportation: Meets all requirements of the International Air Transport Association (I.A.T.A Dangerous Goods Regulations)
  • Low maintenance
  • Excellent recovery from deep discharge.
  • Conforms to BS EN61056-1 and IEC1056-1 regulations.

Light Emitting Diode Specification

  • LED light strip housed in aluminium extrusion complete with lens and end caps
  • Illumination - CRI LED’s
  • LED colour temperature - 12v (4100k)

PIR Sensors Specification 

  • Type: Passive infrared sensor

  • Range: up to 5 metres

  • Detection Angle: 120°

Post Specification 

  • Cap and lid Die-cast aluminium, to BS EN 755- 2:2013

  • Post and chassis Extruded aluminium to BS EN 755- 9:2001

  • Processing CNC machining with cutter heads using mineral-based coolant

  • Powder coating finish any RAL colour

  • IP rating 66 ( ingress protection)





A1 Size

Overall size: 740mm w x 1080mm h Visual size: 610mm w x 860mm h

A0 Size

Overall size: 1330mm w x 1080mm h Visual size: 1200mm w x 860mm h

Special sizes available on request.

  • Aluminium construction

  • Powder coated

  • Toughened glass covers

  • Side hinge - left or right or top hinged with gas cylinders

  • Permanent ventilation

  • Magnetised interior back panel

  • Vandal and frost proof locks

  • 140mm deep

  • Available in any RAL colour as a special volume order

Related products

Get in touch

Make a custom enquiry

Have a custom or volume quote? Do you want to talk to the  technical sales team? Simply fill out this form.

Our highly experienced sales team will get in touch within 24 hours.